GA-MMA Nailing System
130º Ga-mma Nail with
Anti-Rotation Screw, Short
Ficha técnica
130º Ga-mma Nail with
Anti-Rotation Screw, Long
Ficha técnica
Cephalic
Screw
Ficha técnica
4.8mm
Locking Screws
Ficha técnica
End Cap, Ga-mma Nail with
Anti-Rotation Screw
Ficha técnica
Inner Screw, Ga-mma Nail with
Anti-Rotation Screw
Ficha técnica
Anti-Rotation Screw, Ø6.4mm
Ficha técnica
| 1457-001 | Radio Graphic Ruler |  |
| 1457-002 | Protection Sleeve |  |
| 1457-003 | Guide Sleeve |  |
| 1457-004 |
Ball Tip Guide Wire |
 |
| 1457-005-10 |
Flexible Reamer, Ø10mm |
 |
| 1457-006-11 | Flexible Reamer, Ø11mm | |
| 1457-007-12 | Flexible Reamer, Ø12mm | |
| 1457-008-13 | Flexible Reamer, Ø13mm | |
| 1457-009 |
T Handle with Quick Cooling |
 |
| 1457-010 | Entry Reamer, Cannulated |  |
| 1457-011 | Cannulated Awl |  |
| 1457-012 | Tissue Protector |  |
| 1457-013 | Insertion Handle |  |
| 1457-014 | Nail Holding Bolt |  |
| 1457-015 | Guide Wire Holder |  |
| 1457-016 | Insertion Connecting Rod |  |
| 1457-017 | Combination Wrench |  |
| 1457-018 | Insertion Hammer |  |
| 1457-019 | Proximal Targeting Device |  |
| 1457-020 | Protection Sleeve (for Distal Locking Screw) |  |
| 1457-021 | Trocar for Distal Locking |  |
| 1457-022-4.3 | Drill Sleeve, Ø4.3mm (for Distal Locking Screen) |  |
| 1457-023 | Distal Targeting Device |  |
| 1457-024 | Sliding Hammer |  |
| 1457-025 | Screw Driver, SW3.5 (for End Cap) |  |
| 1457-026 | Allen Wrench |  |
| 1457-027 | Hex Screw Driver, SW7.0 |  |
| 1457-028 | Protection Sleeve (for Cephalic Screw) |  |
| 1457-029 |
Trocar Sleeve, (for Cephalic Screw) |
 |
| 1457-030 |
Trocar (for Cephalic Screw) |
 |
| 1457-031 | Measuring Device (for Cephalic Screw) |  |
| 1457-032 | Insertor (for Cephalic Screw) |  |
| 1457-033 | Screw Driver SW3.5 (for Distal Locking Screw) |  |
| 1457-034 |
Driver for Nail Holding Bolt |
 |
| 1457-035 | Proximal Cortex Cannulated Drill, Ø10mm |  |
| 1457-036 | Cannulated Drill, Ø10mm (for Cephalic Screw) |  |
| 1457-037 | Measuring Device (for Anti-Rotation Screw) |  |
| 1457-038 | Protection Sleeve (for Anti-Rotation Screw) |  |
| 1457-039 | Trocar Sleeve (for Anti-Rotation Screw) |  |
| 1457-040 | Trocar (for Anti-Rotation Screw) |  |
| 1457-041 | Screw Driver (for Anti-Rotation Screw) |  |
| 1457-042 | Drill (for Anti-Rotation Screw) |  |
| 1457-043 | Holding Driver, SW3.5 |  |
| 1457-044-2.5 | Guide Wire Ø2.5 |  |
| 1457-045-3.0 | Guide Wire Ø3.0 (with Threaded Tip) |  |
| 1457-046 | Hammering Rod (for Extraction) |  |
| 1457-047 | Depth Gauge /for Measuring unto 100mm) |  |
| 1457-048 | Screw Length Gauge |  |
| 1457-049 | Clean Brush |  |
| 1457-050 | Cephalic Screw Holder |  |
| 1457-051-4.3 | Drill Bit, Ø4.3mm |  |
| 1457-052 | Stopper (for Drill Bit, Ø4.3mm) |  |
1457-000S Ga-mma Nail Type-II Instrument Set
